Split Lace Up Cable Grip

SPLIT LACE UP – CODE SL
Not single eye – all other designs add SL after code. ie. DESL, FESL, OESL. Used for attachment at any point on the cable.

Cable-Grips are manufactured in three main designs – Single eyes, Double eye and open ended. Cable-Grips can be used as pulling grips, support grips, connecting grips etc. They can also be manufactured in a split design to enable the grip to be fitted at a point some way down the cable or under a large termination, for instance. Cable-Grips can also be manufactuered in non-conductive and/or anti-magnetic materials – such as for use on power cables.

When ordering please state your requirements using the information below:1. Design SE, DE, FE, OE
2. Special Features SL, MS
3. Size using the table below
4. Special Material
S/S – Stainless Steel
NC – Non ConductiveTE – Thimble Eye(Unless otherwise specified all cable grips come as galvanised)5. Load if not standard

* Items not stocked
L = Lattice (weave) Length
Factory of Safety: It is recommended that a minimum of 3:1 is used