SINGLE EYE – CODE SE
Can only be fitted over the end of a cable. Gives high pulling strength.
Cable-Grips are manufactured in three main designs – Single eyes, Double eye and open ended. Cable-Grips can be used as pulling grips, support grips, connecting grips etc. They can also be manufactured in a split design to enable the grip to be fitted at a point some way down the cable or under a large termination, for instance. Cable-Grips can also be manufactuered in non-conductive and/or anti-magnetic materials – such as for use on power cables.
When ordering please state your requirements using the information below:1. Design SE, DE, FE, OE
2. Special Features SL, MS
3. Size using the table below
4. Special Material
S/S – Stainless Steel
NC – Non ConductiveTE – Thimble Eye(Unless otherwise specified all cable grips come as galvanised)5. Load if not standard
| Single Eye Code SE | ||||
| Diameter Range mm |
Code Single Eye |
L Standard |
Break Load KG |
|
| Single Weave | ||||
| 4-6 | SE 4-6 | 120 | 200 | |
| 6-9 | SE 6-9 | 160 | 200 | |
| 10-13 | SE 10-13 | 200 | 490 | |
| 14-19 | SE 14-19 | 350 | 1280 | |
| 20-25 | SE 20-25 | 400 | 2400 | |
| 26-38 | SE 26-38 | 450 | 3200 | |
| Double Weave | ||||
| 39-50 | SE 39-50 | 525 | 5200 | |
| 51-63 | SE 51-63 | 600 | 9400 | |
| 64-90 | SE 64-90 | 690 | 9400 | |
| 91-115 | SE 91-115 | 690 | 9400 | |
| 116-140 | SE 116-140* | 1000 | 9400 | |
| 141-165 | SE 141-165* | 1000 | 17000 | |
| 166-190 | SE 166-190* | 1000 | 17000 | |
| 191-215 | SE 191-215* | 1000 | 17000 | |
| 216-270 | SE 216-270* | 1000 | 17000 | |
| 271-290 | SE 271-290* | 1000 | 17000 | |
* Items not stocked
L = Lattice (weave) Length
Factory of Safety: It is recommended that a minimum of 3:1 is used
Brand
Albion Manufacturing
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.