William Hackett CP-C4 Anti Corrosion Chain Hoist

The William Hackett CP-C4 corrosion protected chain hoist meets and exceeds the requirements of the following international standards:

British Standard BS EN13157:2004 + AI:2009
American Standard ASME B30.16-2012
Australian Standard AS1418.2-1997
South African Standard SANS 1594:2007
NORSOK R-002: 2017

The William Hackett CP-C4 chain hoist is manufactured in accordance with EN13157 which requires that it can be used within an operating temperature range of -40ºc to +55ºc.

William Hackett has taken its extensive knowledge of corrosion protection acquired in the supply of specialist topside and subsea hoisting range to the offshore sector and translated this technology to a second generation range of William Hackett CP-C4 anti corrosion chain hoists. These hoists can be supplied in the following configurations;

• Single hook suspension unit
• Low headroom combined chain hoist and push travel trolley
• Low headroom combined chain hoist and geared travel trolley

All the above hoist configurations can also be supplied with the following options:

• Calibrated Grade T (8) load chain to BS EN818-7 zinc plated with zinc plated hand chain
• Calibrated Grade T (8) load chain to BS EN818-7 DT9 corrosion coated and hand chain Dacromet corrosion coated
• Calibrated Grade S (6) 316L stainless steel load chain, hand chain and bottom hook (stainless steel bottom hooks are only available for 500kg and 1 tonne units)
• Overload protection option available

Features

• 500hrs + Protection against salt spray tests according to ASTM B117
• Twin pawls as standard
• Heavy duty forged safety catches
• Stainless steel fixings used throughout the hoist
• Hook housing is bolt connected using cap head screws and nyloc nuts
• All hoist components are corrosion protected
• Load chain meets the requirements of European Standards: EN818-7
• Compact and robust design for easy handling

Performance and Testing
The William Hackett CP-C4 chain hoist has been fully tried and tested to include:

• Minimum Breaking Load – a minimum of 4 x the WLL
• The load chain anchor / end stop tested to at least 2.5 x the WLL with no restriction of either the brake or gears
• All hoists are 100% proof tested at 1.5 x the Working Load Limit
• Light load of 2% of Working Load Limit