OPEN ENDED - CODE OE
For fast non positive connection of two cables, wires or ropes.
Cable-Grips are manufactured in three main designs - Single eyes, Double eye and open ended. Cable-Grips can be used as pulling grips, support grips, connecting grips etc. They can also be manufactured in a split design to enable the grip to be fitted at a point some way down the cable or under a large termination, for instance. Cable-Grips can also be manufactuered in non-conductive and/or anti-magnetic materials - such as for use on power cables.
When ordering please state your requirements using the information below:1. Design SE, DE, FE, OE
2. Special Features SL, MS
3. Size using the table below
4. Special Material
S/S - Stainless Steel
NC - Non ConductiveTE - Thimble Eye(Unless otherwise specified all cable grips come as galvanised)5. Load if not standard
|Open Ended Code OE|
L = Lattice (weave) Length
Factory of Safety: It is recommended that a minimum of 3:1 is used
Trust our high standards
Our Industry Certifications