Items:
Value:
Load Cell for Hire
Personal Protective Equipment
Special Offers
Ratchet Straps
Lifting Slings
RidgeGear Harnesses & Fall Arrest
Mullion Offshore Garments & Life Jackets
Tigershark Sub Sea Equipment
Hand Chain Hoists
Ratchet Lever Hoists
Electric Chain Hoists
Pneumatic Chain Hoists
Spark Resistant Hoists
Wire Rope Hoists and Cranes
Electric Winches
Chains and Components
Trolleys and Beam Clamps
Plate Clamps
Block Grabs
Permanent Lifting Magnets
Load Binders
Shackles
Synthetic Ropes
Handling Equipment
Jacking
Load Cells
Load Moving Skates
Cable Pullers
Wire Ropes
Cable Grips
Shop by Manufacturer
Camlok Manual Lifting Clamps
Online Catalogue
|
Plate Clamps
| Camlok Manual Lifting Clamps
TPZ - Board Clamp
The TPZ board clamps offer an simple and effective way to vertically lift and transport a variety of materials such as wood, MDF, plasterboard, and plastics. They can also be used to lift loads from the vertical to the horizontal through 90deg for transportation. The range has been designed to be user friendly and the handle enables the operator to guide the load easily during operation and each clamp is supplied fitted with large rubber pads to minimise damage.
These clamps are ideal in production facilities and especially on construction and building sites.
*Per clamp *Please contact our sales team for full technical drawings.
Product Code
WLL
(kgs*)
Jaw Capacity
(mm)
Weight
(kgs)
Price £ (ex VAT)
TPZ 400
20 - 400
5 - 55
8
£372.19
TPZ 400L
20 - 400
50 - 100
9
£423.75
TPZ 750
40 - 750
5 - 60
12
£537.19
TPZ 750L
40 - 750
60 - 120
14
£594.38
TPZ 1500
75 - 1500
5 - 75
13
£644.06
TPZ 1500L
75 - 1500
75 - 150
15
£7702.19
Please call us on (01953) 889998 for more information, including pricing and available discounts.
HGC - Hand Grip Clamp
The HGC hand grip clamp is suited for the individual transport of light and thin plates. It has a jaw capacity of up to 10 mm and can lift up to 250kgs.
To operate the clamp you simply press down on the hand grip which releases the tension spring. This allows the clamp to open and slide onto the plate. The plate can then be lifted and transported using the ergonomically designed hand grip. The positive spring pressure prevents the plate from accidentally slipping out of the clamp.
NB. Plate surface of material lifted must not exceed a hardness level of HRC 30/Brinell 300.
*Per clamp *Please contact our sales team for full technical drawings.
Product Code
WLL
(kgs*)
Jaw Capacity
(mm)
Weight
(kgs*)
Price £ (ex VAT)
HGC 250
250
0 - 10
1.4
£121.88
Please call us on (01953) 889998 for more information, including pricing and available discounts.
Online Catalogue
|
Plate Clamps
| Camlok Manual Lifting Clamps
© Copyright Robert Harwood Trading (East Anglia)Ltd
Unit 1 Hillier House Norwich Road Watton Thetford Norfolk IP25 6JX United Kingdom