Drum Handling

Online Catalogue | Handling Equipment |  Drum Handling

DC500 - Drum Clamp The DC500 drum clamp has been designed to lift and transport drums. If moving empty or sealed drums then one clamp is sufficient on its own. Should you be lifting an open full drum, then two clamps should be used with a two leg chain sling. This clamp is extremely light weight and very quick and easy to use. Product Code WLL (kgs*) Weight (kgs*) Price £ (ex VAT) DC500 500 1.2 £114.38 Please call us on (01953) 889998 for more information, including pricing and available discounts.

DCV500 - Drum Clamp The DCV500 drum clamp has been designed to lift and transport drums in the vertical position. One clamp can be used to lift drums with or without their lids by gripping the rim of the drum. Its light weight and small overall design makes it ideal for picking up drums that sit tightly on pallets. The centre of gravity of the drum is the lifting point during transportation. The DCV500 is also available with a 'lock on / open latch'. Please contact the Camlok sales team for further details. Product Code WLL (kgs) Weight (kgs) Price £ (ex VAT) DCV500 500 7 £133.13 Please call us on (01953) 889998 for more information, including pricing and available discounts.

DA / DAF Drum Clamp The DA drum grab is designed for the vertical transportation of steel drums. The jaws grab under the lip of the drum with its form-fitting connection. The DAF drum grab works on the same principle as the DA grab, but has the added benefit of adjustable arms that can be used with an overhead crane or forklift. Product Code WLL (kgs) Jaw Capacity (mm) Weight (kgs) Price £ (ex VAT) DA 350 420 - 700 3.5 £313.13 DAF 350 420 - 700 6.0 £350.63 Please call us on (01953) 889998 for more information, including pricing and available discounts.

DT - Drum Tongs The DT drum tongs have been designed for use when lifting and transporting drums in the horizontal position. To use these tongs you simply attach the jaws below the rolled edge on either end of the drum and lift the handle upwards. The drum is then ready to lift. The weight of the drum on the tong jaws prevents the jaws from opening. To release the tongs simply place the drum on the ground and push downward on the lever. NB: These tongs as designed for use with STEEL DRUMS only. Product Code WLL (kgs) Drum Length (mm) Weight (kgs) Price £ (ex VAT) DT 500 600 - 900 5.5 £181.88 Please call us on (01953) 889998 for more information, including pricing and available discounts.

DBV - Drum Grab The DBV500 drum grab has been designed for the transportation of upright barrels. This unit grabs upright barrels and sets them down in the same position. The clamping jaws are fitted with a hard rubber lining to provide a force-locking hold. There is a form-locking support on the top edge rim or bead that provides extra safety. This additional feature is Indispensable if the surface of the barrels is stained with oil or grease. This particular drum clamp is suitable for all standard types of STEEL drums. Product Code WLL (kgs) Jaw Capacity Ø(mm) Weight (kgs) Price £ (ex VAT) DVT 300 400 - 600 65 £921.56 Please call us on (01953) 889998 for more information, including pricing and available discounts.

DBT - Drum Grab The DBT drum grab with tipping device has been designed for the transportation, lifting, placing down, turning over and emptying of barrels. In order to tip the drums easily, the must be picked up at the correct centre of gravity. NB: These grabs as designed for use with STEEL DRUMS only. Product Code WLL (kgs) Jaw Capacity Ø(mm) Weight (kgs) Price £ (ex VAT) DBT 300 400 - 600 83 £1,150.31 Please call us on (01953) 889998 for more information, including pricing and available discounts.

Online Catalogue | Handling Equipment |  Drum Handling