Coil Handling

Online Catalogue | Handling Equipment |  Coil Handling

TCK - C-Hooks Single-arm, C-Hooks The Camlok TCK C-Hooks have been designed to safely and efficiently handle coils, rolls, rings, pipes, round stock and other similar loads. Many features are available on C-hooks. When lifting collared or standard pipes, the backstop device can be positioned as far back as possible. lf the lifting of shover pipes is required the backstop can be adjusted accordingly. Loads that are longer, or exceed the specified working load limit, should not be lifted. Camlok uses the latest 3D CAD Design technology to quickly produce specific products tailored to our customers requirements. There are many additional options available including shaped tines and adjustable end-stops. Load details: The more information you can provide the quicker a quote can be prepared. Please provide the Width (A) x Outside Dia. (B) x Inside Dia. (C) Please call us on (01953) 889998 for more information, including pricing and available discounts.

TACH - C-Hooks Twin-arm, C-Hooks for confined spaces The Camlok TACH Twin-arm, C-Hooks are designed to lift loads in the horizontal position and are ideal for narrow-isle handling applications. The hooks are suspended from notches on the top beam. These allow the arms to be adjusted to suit a variety of load widths. This hook can be engaged and released by a single crane operator. AlI TACH C-hooks are individually designed to your specific requirements. Please call our engineering department with your measurements and we will do the rest. Please call us on (01953) 889998 for more information, including pricing and available discounts.

TCS - Coil Turning Hooks The TCS coil turning hooks are specifically designed to pick coils of steel or banding material etc when lying flat. Once the turning hook is positioned and the crane hook is raised, the coil automatically transfers from the horizontal position to the vertical position. This allows for easy transportation and also allow for loading onto machines or racking. Place the hook into the coil centre as shown (diagram 1), with the back of the lifting shoe touching the inside of the coil and the lifting sling vertical. Slowly hoist up until the coil rises from the ground. As the coil rises, traverse the crane back so that the coil pivots on the lower rear corner (A - diagram 2). Continue hoisting and traversing the crane until the coil is vertical (diagram 3). Take special care when the pivot point is below the cog of the coil, as the coil will topple back into the hook. lf thin coils are lifted then place the coil down on Its edge and move the coil to the rear of the hook for transporting. Product Code WLL (kgs) Coil (mm) Min. Internal Diameter Weight (kgs) Price £ (ex VAT) TCS 0.5/ 120 500 50 - 120 220 9 £197.81 TCS 0.5/ 200 500 100 - 200 300 10 £210.00 TCS 1.0/ 200 1000 100 - 200 300 13 £219.38 TCS 1.0/ 300 1000 200 - 300 400 15 £273.75 TCS 2.0/ 200 2000 100 - 200 300 21 £330.00 TCS 2.0/ 300 2000 200 - 300 400 23 £389.06 TCS 3.0/ 200 3000 100 - 200 300 34 £429.38 TCS 3.0/ 300 3000 200 - 300 400 39 £498.75 Please call us on (01953) 889998 for more information, including pricing and available discounts.

DL5 - Cable Drum Lug The DL5 cable drum lug with locking lever has been designed for the lifting, loading or transportation of steel or wooden cable reel drums. The simple design allows the user to place the lugs either side of the drum, attach a two legged chain sling (not supplied) and lift. The standard capacity supplied is 5000kgs oval the pair however other sires can be manufactured upon request. Product Code WLL* (kgs) Hole Size (mm) Weight (kgs) Price £ (ex VAT) DL 5 5000 82 X 85 11 £229.69 Please call us on (01953) 889998 for more information, including pricing and available discounts.

Online Catalogue | Handling Equipment |  Coil Handling